PHYSICS CREST
Physics

Topic 1.5B · Forces B · Friction, Turning & Stability

Gravity in calculations: near Earth, g ≈ 9.8 m/s² (9.8 N/kg). Use the value supplied by the question, page instructions or activity; use 10 when it is specified.

Connect contact forces to real motion, then see every turning problem through one examiner lens: force, perpendicular distance, turning sense, and the line of action of weight.

Core friction & dragSupplement multi-force momentsATP moments & COGDiagram-first notebook
Forces B visual decision board CONTACTfrictiondragheatingMOMENTF × ⟂ distanceCW / ACWsum by senseBALANCEΣF = 0ΣM = 0both requiredSTABILITYlow COGwide baseweight line
Use the diagram to identify direction, turning sense and support boundary.
1
Contact force between surfaces

Friction

Solid friction is a force between surfaces that may impede their relative motion. It acts along the contact surface and opposes actual or attempted sliding.

Friction opposes relative surface motion motion rightfriction leftheating may occur
Direction comes from the attempted or actual relative motion, not from “left” or “right” by habit.
Friction can be useful or unwanted tyre gripbearing + lubricantbrake contact
Explain the purpose in context; avoid saying friction is always bad.

Useful friction

Shoe grip, tyre grip, brakes, holding an object, writing.

Unwanted friction

Wear and heating in bearings, axles and sliding machine parts.

Friction design choices increase griprough/treaded contactreduce rubbinglubricant or bearingsenergy effectheating
Read the labels and units before choosing a method.
Direction mnemonicR-O-M

Relative motion first · friction Opposes it · draw along the contact Material.

Interactive · Friction Direction

Set the relative sliding direction

Friction on the object acts left.
Direction mark: identify motion relative to the surface. Avoid memorising “friction points backwards” without defining backwards relative to what.
Absolute-language trap: friction is not always unwanted and does not always stop an object. It may provide the force needed to start, steer or brake.
2
Friction-like resistance in liquids and gases

Air and liquid resistance

Drag in a liquid motiondragmoving through liquid
Drag acts opposite motion relative to the surrounding fluid.
Drag in a gas motiondragmoving through gas
Drag acts opposite motion relative to the surrounding fluid.

Drag is the resistive force on an object moving relative to a liquid or gas. Air resistance is drag in air.

Shape changes fluid flow and drag bluntstreamlined
A smoother tapered outline generally reduces drag at the same speed and size scale.

Direction

Opposite the motion relative to the fluid.

Speed effect

Drag usually increases as relative speed increases.

Shape effect

Streamlining usually reduces drag.

Vertical forces on a falling object 260 N drag720 N weightcompare arrow magnitudesresultant sets accelerationequal → constant velocity
Balanced forces mean zero acceleration, not zero speed.

If weight exceeds drag, the resultant is downward. As speed rises, drag grows. When drag equals weight, the resultant and acceleration are zero, so the object continues at constant speed.

Interactive · Vertical Force Comparator

Compare weight and upward drag

Resultant = 460 N downward.
Integrated motion point: equal weight and drag means constant velocity, not that the object has stopped or that no forces act.
Streamlining wording: write “reduces drag” rather than “removes air resistance.” Drag is rarely exactly zero.
3
Turning effect about a chosen point

Moments

  • A moment measures turning effect about a pivot.
  • Moment = force × perpendicular distance from pivot to the force’s line of action.
  • Extend the force line if needed and draw the shortest distance to it.
Top view: push perpendicular to the doorTop view: push perpendicular to the doorhinge / pivotpushperpendicular distance from hinge to force line
For the same force, a larger perpendicular distance produces a larger moment.

The moment of a force is a measure of its turning effect about a pivot.

$M=Fd$

$d$ is the perpendicular distance from the pivot to the force’s line of action. Moment is measured in N m.

Moment about a pivot 30 N 0.40 mpivot
Moment = force × perpendicular distance. Include N m and turning sense when requested.

Worked moment

$M=(30)(0.40)=12$ N m clockwise.

Moment about a pivot 25 N 0.20 mpivot
Moment = force × perpendicular distance. Include N m and turning sense when requested.
Interactive · Moment Engine

Use the perpendicular lever arm

Moment = 12.0 N m clockwise.
Moment mnemonicF-P-S-U

Force × Perpendicular distance · state turning Sense · include Unit N m.

Everyday examples: door handle/hinge, spanner/nut, pedal/crank, seesaw/pivot. Name both the force and the pivot.
Your turn · Find the moment of a 5 N force with a perpendicular distance of 0.40 m.

Decimals and scientific notation are accepted. Compatible units are accepted.

4
Line of action is the invisible key

Perpendicular distance

  • A tilted beam’s length is not necessarily this distance.
  • A force passing through the pivot has zero moment even if its application point is far away.
  • A door handle gives a large lever arm, making a useful turning effect possible with a smaller force.
  • Moments are expressed in N m; they are not described as energy in joules in this context.
Moment: use the perpendicular distanceMoment: use the perpendicular distanced = 0.18 mF = 45 Ntool length 0.25 mM = 45 × 0.18= 8.1 N m
The correct lever arm is the shortest distance from the pivot to the force line.
  1. Extend the force arrow into a straight line of action.
  2. Locate the pivot.
  3. Draw the shortest line from pivot to line of action.
  4. Check for a right angle.
  5. Use that distance in $M=Fd$.
Which distance belongs in M = Fd? force45 Ntool length0.25 mperpendicular lever arm0.18 m
Read the labels and units before choosing a method.

Worked angled force

Use 0.18 m: $M=(45)(0.18)=8.1$ N m. The 0.25 m sloping tool length is not perpendicular to the force line.

A force through the pivot has zero momentA force through the pivot has zero momentline of actionpasses through pivotPerpendicular distance = 0, so moment = 0.
Moment = force × perpendicular distance. Include N m and turning sense when requested.

Force through pivot

Perpendicular distance is zero, so the moment is zero even if the force is large.

Force at 90° to lever

The lever length is then the perpendicular distance.

Interactive · Lever-Arm Comparator

Same force, different perpendicular distance

For the same force, B gives 1.67× the moment of A.
Ruler-distance trap: a distance marked along a sloping beam is not automatically the lever arm. Look for—or construct—the right angle.

Pause · explain it yourself

Why is it harder to open a door by pushing near the hinges?

Which distance is used when calculating a moment?

5
Sum by turning sense

Principle of moments

  • For rotational equilibrium, sum of clockwise moments equals sum of anticlockwise moments.
  • Choose a pivot that removes unknown forces passing through it.
  • List the direction of each moment before summing.
Balanced beam: clockwise = anticlockwise 20 N? N0.30 m0.20 m
Keep force, perpendicular distance and turning sense in separate columns.
$\sum M_{clockwise}=\sum M_{anticlockwise}$

One force on each side

$(20)(0.30)=F(0.20)$, so $F=30$ N.

Several forces about one pivot 100 N60 N? N1.5 m0.5 m1.0 m
Calculate each moment first, then add moments with the same turning sense.

Several forces

Total anticlockwise moment $=(100)(1.5)+(60)(0.5)=180$ N m.

For balance, $F(1.0)=180$, so $F=180$ N.

Moment-solving routine step 1choose pivotstep 2label CW / ACWstep 3calculate every Fdstep 4sum each sensestep 5equate and solve
Read the labels and units before choosing a method.
Interactive · Beam Balance Solver

One force on each side

Required right force = 30.0 N.
Balance mnemonicC-A-L-C

Choose pivot · mark Anticlockwise/clockwise · use perpendicular Lever arms · Compare totals.

Support-force shortcut: when taking moments about a support, any force whose line of action passes through that point has zero moment and drops out of the moment equation.
6
No translation and no rotation

Equilibrium

  • Include the beam’s weight unless it is negligible; for a uniform beam this acts at the midpoint.
  • Full equilibrium also requires zero resultant force.
  • A support force through the chosen pivot has no moment there but still enters the vertical force balance.
  • Keeping these two conditions separate prevents an incomplete solution.
Complete equilibrium needs two zeroes updownΣF = 0ΣM = 0
No resultant force and no resultant moment.
$\sum F=0$    and    $\sum M=0$

A rigid object is in equilibrium only when there is no resultant force and no resultant moment. One condition does not guarantee the other.

Balanced beam: clockwise = anticlockwise 12 N20 N0.50 m0.30 m
Keep force, perpendicular distance and turning sense in separate columns.
Two-condition audit force resultcheck horizontal + verticalmoment resultcheck CW + ACWfinal verdictboth zero?
Read the labels and units before choosing a method.
SituationResultant forceResultant momentConsequence
complete equilibriumzerozerono linear or angular acceleration
equal opposite forces on different lineszeromay be non-zeroturning tendency
moments balance but forces do notnon-zerozerolinear acceleration
Quick check · A balanced beam is horizontal. Is that enough?
Not by itself. Balanced moments prove rotational equilibrium; the vector sum of forces must also be zero for complete equilibrium.
Precision: write “no resultant force and no resultant moment.” Avoid “all forces are equal”; forces may differ yet still balance as vectors and moments.

Pause · explain it yourself

What condition is needed in addition to zero resultant moment for full equilibrium?

7
Where the whole weight may be treated as acting

Centre of gravity

  • To locate it in a thin irregular lamina, suspend the lamina and mark a vertical using a plumb line.
  • Repeat from another hole; the lines intersect at the centre of gravity.
  • When tilting an object, consider the vertical through this point.

The centre of gravity is the point through which the object’s entire weight may be considered to act.

Suspending an irregular lamina pin + holeplumb linewait until still
Trace the vertical along the plumb line; do not draw a line merely through the geometric centre.
Two plumb-line traces locate the centre of gravityTwo plumb-line traces locate the centre of gravityIntersection = centre of gravityTraces from two different suspension positions
Use at least two widely separated suspension points; a third line checks the result.
  1. Make a small hole near the lamina edge.
  2. Suspend freely from a pin.
  3. Hang a plumb line from the same pin and wait until still.
  4. Trace the vertical line on the lamina.
  5. Repeat from a well-separated second hole.
  6. Mark the intersection; use a third line as a check.
Centre-of-gravity experiment · improve each measurementCentre-of-gravity experiment · improve each measurementsmall hole + thin pinwell-defined suspension pointwidely separated holesindependent plumb-line traceslarge crossing angleclearer intersection
Read the labels and units before choosing a method.
Lamina mnemonicH-S-P-T-I-C

Hole · Suspend · Plumb · Trace · Intersect · Check.

Why the method works: a freely suspended lamina settles so its centre of gravity is vertically below the suspension point; therefore every traced plumb line contains the COG.
Two common omissions: failing to say “allow it to hang freely/settle,” and failing to repeat from a second suspension point.

Pause · explain it yourself

Why use more than one suspension point for a lamina?

8
Follow the vertical line through the COG

Stability and toppling

  • While the vertical line through the centre of gravity lies within the support base, weight can provide a restoring moment.
  • Beyond the support edge, weight gives an overturning moment.
  • A wider base and lower centre of gravity generally allow a greater tilt before toppling.
  • Friction resists sliding but does not replace this geometric stability condition.
Stability comparison low COG · wide basehigh COG · narrow base
The vertical weight line must remain inside the base of support.
Weight stays vertical as the object tiltsWeight stays vertical as the object tiltsinside basethrough edgeoutside base
Inside = restoring tendency; edge = threshold; outside = overturning moment.

For a supported object, imagine a vertical line through its centre of gravity:

Inside base

Weight gives a restoring tendency about the nearest edge.

Through edge

The object is at the tipping threshold.

Outside base

Weight gives an overturning moment.

Tilt slowly and watch the vertical weight lineTilt slowly and watch the vertical weight lineWeight is verticalIncrease tilt until the weight line reaches the lower contact edge.
Raise slowly, record the angle when the upper base edge just lifts, and repeat.
Interactive · Tipping-Angle Explorer

Simple rectangular model

Threshold tilt ≈ 18.4°.
Stability mnemonicL-W-I

Low centre of gravity · Wide base · weight line stays Inside.

Cause-and-effect chain: lower COG or wider base → larger tilt before weight line reaches the edge → greater stability.
Do not say only “more stable because it is heavier.” The required qualitative explanation uses centre-of-gravity position, base width and line of action.
9
Alternative to Practical

ATP Lab Lens: moments, COG and stability

Several forces about one pivot known massknown massforce metermeasured dmeasured dmeasured d
Calculate each moment first, then add moments with the same turning sense.
Suspending an irregular lamina pin + holeplumb linewait until still
Trace the vertical along the plumb line; do not draw a line merely through the geometric centre.
Tilt slowly and watch the vertical weight lineTilt slowly and watch the vertical weight lineWeight is verticalIncrease tilt until the weight line reaches the lower contact edge.
Raise slowly, record the angle when the upper base edge just lifts, and repeat.

Moment practical

Horizontal beam, low-friction pivot, vertical forces, perpendicular distances, repeat arrangements.

COG practical

Small holes, free suspension, settled plumb line, thin traces, third-line check.

Stability practical

One factor changed, same base/mass controls, slow tilt, repeat threshold angle.

Error sourceLikely effectTargeted improvement
pivot frictionbeam can appear balanced when moments differ slightlysharp low-friction pivot; gently disturb and let settle
parallax on positionslever arm too high or lowread directly above/below hanger line
thick plumb tracesbroad COG intersectionsharp pencil and thin line
toppling release too fastthreshold angle overshotraise board slowly; use fine angle scale
Evaluation formula: name the limitation, state what it changes, then give an improvement aimed at that mechanism.
Distance wording: in a horizontal beam with vertical loads, the measured horizontal distance is perpendicular. In an angled system, explicitly measure from pivot to line of action at 90°.
10
One-page visual recall

Topic 1.5B Master Sheet

Forces B visual decision board CONTACTfrictiondragheatingMOMENTF × ⟂ distanceCW / ACWsum by senseBALANCEΣF = 0ΣM = 0both requiredSTABILITYlow COGwide baseweight line
Use the diagram to identify direction, turning sense and support boundary.
Moment: use the perpendicular distanceMoment: use the perpendicular distanced = 0.18 mF = 45 Ntool length 0.25 mM = 45 × 0.18= 8.1 N m
The correct lever arm is the shortest distance from the pivot to the force line.
Weight stays vertical as the object tiltsWeight stays vertical as the object tiltsinside basethrough edgeoutside base
Inside = restoring tendency; edge = threshold; outside = overturning moment.

Equation bank

$M=Fd$
$\sum M_{CW}=\sum M_{ACW}$
$\sum F=0$ and $\sum M=0$

Memory board

ROM · friction direction
FPSU · moment answer
CALC · balance routine
HSPTIC · lamina method
LWI · stability
If the question shows…First move
object moving through fluiddraw drag opposite relative motion
pivot + force arrowextend line of action and find perpendicular distance
several beam forcescalculate each $Fd$ and group CW/ACW
“equilibrium”check both resultant force and resultant moment
suspended laminatrace two or more plumb verticals
tilted objectdraw vertical weight line and compare with base
Final answer audit: friction/drag direction? perpendicular distance? turning sense? N m unit? beam weight included if its COG is away from pivot? both equilibrium conditions? weight line compared with base?
Interactive mastery: 0 / 6 explored

Use every explorer once, then test the ideas independently in Practice.